FRETZ RH-DL Deluxe Set

sku: 8141259

This Fretz RH Holder Deluxe Set is a unique and useful repoussé system for snarling and embossing forms held in pitch (pitch not included). The curved shape of the RH Holder allows it to reach around one side of hollow forms like bracelets in order to...

FRETZ S-1 Stake Rack 8.75x5"

sku: 8141079

This Fretz S-1 Wooden Stake Rack is perfect for holding and organizing your Fretz miniature stakes. Using this holder helps you keep your bench clean and organized and helps protect your stakes from accidental wear and tear. 

FRETZ S-2 Micro Holder for H-2

sku: 8141087

The Fretz S-2 Wooden Micro Stake Holder is designed to hold and organize your Fretz H-2 Insert Stakes. Using this handy holder with the square hole for the H-2 as well as many other holes for micro stakes (all sold separately) not only helps you...

FRETZ S-3 Stake Rack 12x5"

sku: 8141080

This generously sized Fretz S-3 Wooden Stake Rack is used for holding and organizing your Fretz miniature stakes. This 12x5" holder helps you keep your bench clean and organized and helps protect your stakes from accidental wear and tear. 

FRETZ SET AT-1,2,3,4 Micro Miniature Mandrel Set of 4

sku: 8141086

This Fretz Micro-Miniature Mandrel set of 4 is ideal for forming very small parts for small stones and long oval stones. Lets you form tight curves so you can perfectly form an exact bezel fit. Can also be used for fabricating both shallow and deep...

FRETZ Set BA Bench Anvil Set of 4

sku: 8141300

Bench anvils are mushroom stakes that allow you to shape and texture sheet metal. These feature wooden bases to absorb some hammer noise and rubber feet to keep the anvils from slipping. Also sold individually. All measure 71mm in diameter.  Made in...

FRETZ Set MA Mushroom Stake Set of 4

sku: 8141320

The MA Series Mushroom Stakes can be used for forging, doming, and raising small or large-scale projects. These large stakes (approximately 70mm in diameter) are built to hold up to heavy hammer blows. All Fretz stakes are made from hardened 420...

FRETZ Set MBA Maker Bench Anvil Set of 4

sku: 8141310

This economical set allows you to shape and texture sheet metal at a more approachable price point. These also feature wooden bases to absorb some hammer noise and rubber feet to keep the anvils from slipping. Made from more economical materials than...

FRETZ SET-1 Bezel Forming Set

sku: 8141082

This Bezel Forming Set from Fretz includes 6 Fretz’s Bezel T Stakes designed to make bezel settings for nearly any stone. Each miniature stake has a unique shape, so you can choose the right ones to form bezels in whatever shapes you need. The Stake...

FRETZ SET-10 H-2 I-Series

sku: 8141270

The H-2 I-Series Set consists of fourteen very small stakes so that you can shape metal into a wide range of intricate shapes. Fretz I-Series Stakes fit into the H-2 Holder (not included). You can place the mushroom stakes either in the top hole of the...

FRETZ SET-101 100 Series Master

sku: 8141131

From forming large-scale jewelry to shaping small holloware, Fretz SET-101 is the complete 100 Series Master Set which gives you the stakes and holders you need to tackle almost any jewelry metal forming task. Mount the H-101 Holder onto your workbench...

FRETZ SET-103 Jewelry Bracelet Set

sku: 8141193

The Jewelry Bracelet 100 Series Set has all the convex and concave stakes you need to form a wide range of bracelet shapes. The H-1L Long Holder gives you enough space to mount the stakes and hammer out wide cuffs and bangles. All Fretz miniature stakes...

FRETZ SET-104 Spoon Forming Set

sku: 8141194

Originally created for making spoons, these stakes are perfect for use when creating tear-shaped or oblong domed jewelry formations.  Contains 3 sizes of stakes in small, medium and large sizes. Use the M-119 for serving spoons, the M-120 for...

FRETZ SET-105 Bracelet Starter

sku: 8141195

Stretch, raise, and shape sheet metal into interesting convex and concave forms with the Fretz Bracelet Starter Set. Two stakes allow you to make both concave and convex cuffs, bracelets, and bangles. The H-1L Long Holder gives you ample space away from...

FRETZ SET-11 H-2 Complete Set

sku: 8141293

This H-2 System Complete Set conveniently brings together the smallest Fretz stakes and mandrels, so that you can accomplish the most intricate metal forming tasks. The Stake Holder and Vise Block ensure the stake stays still, so you can use one hand to...

FRETZ SET-12 Mini Wheel Stake Set

sku: 8141294

This Mini Wheel Stake Set from includes all the Fretz wheel stakes for their H-2 Stake Holder (although the H-2 holder is NOT included). Wheel stakes are used for doming flat rings or short lengths of tubing. All Fretz miniature stakes are made from...

FRETZ SET-2 Deluxe BFS Set

sku: 8141083

This Deluxe Bezel Forming Set (BFS) gives you the tools you need to make bezels for even the hardest-to-fit stones. This set includes everything in the Fretz Bezel Forming Set plus the larger R-1 T Stake for making large bezels and three 14mm Mushroom...

FRETZ SET-3 H-2 Micro Stake X-7

sku: 8141088

This H-2 Micro Stake Set from Fretz includes four Micro Mandrels for forming incredibly tight curves and three Micro Mushroom Stakes for doming bezels. The Stake Holder and Vice Block ensure the stake stays still, so you can use one hand to hold your...

FRETZ SET-4 Bezel & Micro Stake

sku: 8141104

This Bezel and Micro Stake Set Complete includes the full line of Fretz Bezel T Stakes, Micro Mushroom Stakes, and Micro Mandrels.  With this set, you can shape bezels with the tightest curves around the hardest-to-fit stones. Use the stake holders...

FRETZ SET-5 Forming Stake Set

sku: 8141098

This Forming Stake Set includes 7 of the most popular Fretz miniature forming stakes, so that you can work sheet metal into nearly any shape. The Stake Holder and Vice Block ensure the stake stays still, so you can use one hand to hold your project and...

FRETZ SET-6 Mushroom Stake Set

sku: 8141136

This handy Mushroom Stake Kit features nine mushroom stakes of different sizes and shapes.  You will be able to dome sheet metal into a variety of different mushroom shapes. Includes a useful wooden stake rack as well as a Stake Holder and Vice...

FRETZ SET-7 Hollow Ring Stakes

sku: 8141137

This Hollow Ring Stake Kit has three raising stakes and one horn stake designed to form sheet metal into any number of small jewelry shapes from rings to bezels to rims. All Fretz stakes are made from hardened 420 stainless steel that have been given a...

FRETZ SET-8 Master Stake Set

sku: 8141138

The Master Stake Set gives you all the stakes, mandrels, and holders you need to accomplish nearly any jewelry forming task. Use Bezel T Stakes and Mushroom Stakes to dome sheet metal into complex shapes, raising stakes to make hollow ring forms, and...

FRETZ Set-9 Progressive Convex Stake Set of 3

sku: 8141109

Fretz designed the Progressive Convex Stake Set to be used after a piece has already been made using the F-2 Doming Stake (sold separately - see our 8141089). Use the F-2A, then the F-2B, then the F-2C in succession to form concave flutes. All Fretz...

FRETZ Set-MGS Michael Good

sku: 8141149

The perfect companion to the Fretz Michael Good hammers, this Michael Good Stake Set gives you six sinusoidal stakes that allow you to transform sheet metal into the beautiful organic forms that result from anticlastic raising. Michael Good worked with...

FRETZ SRM Spinner Ring Set

sku: 8141099

Making spinner rings is easier than ever with this two-piece Spinner Ring Set from Fretz. Simply hammer the mandrel through the ring to give one side a slight flare. Place a smaller ring over the non-flared end and repeat the flaring process on the other...

FRETZ T-101 Double Ended Holder

sku: 8141046

This T-101 holds TWICE the larger Fretz 100 Series Stakes - so convenient when you are using multiple stakes for a project.  One end is at the normal height, while the other is elevated to provide the extra reach needed when forming large and hollow...

FRETZ T-102 Small Round Bracelet Forming Stake

sku: 8141111

The Fretz T-102 Small Round Bracelet Forming Stake is perfect for shaping small cuffs and bangles as well as other small curves. Compatible with Fretz H-101 and VF-101 holders (the holder in the picture is not included.  All holders are sold...

FRETZ T-103 Large Round Bracelet Forming Stake

sku: 8141112

The Fretz T-103 Large Round Bracelet Forming Stake is perfect for shaping large cuffs and bangles as well as other curves. Compatible with Fretz H-101 and VF-101 holders (any holders in the picture are not included but are sold separately). All Fretz...

FRETZ T-105 Large Oval Bracelet Forming Stake

sku: 8141113

The Fretz T-105 Large Oval Bracelet Forming Stake is made to create large oval shapes for cuffs and bangles, but you can use it to create other curves as well. Compatible with Fretz H-101 and VF-101 holders (any holders in the picture are not included...

Fretz VB-1 Cherry Vise Block

sku: 8141081

Use this VB-1 Wood Vise Block to hold the H-1 holder (not included) and then you can use the H-1 holder in a vise rather than permanently affixing that necessary holder to a sturdy surface.  Block measures 3"L x 2"W x 1-1/2"H. 

FRETZ VH-1 Vise Holder Original

sku: 8141052

The VH-1 Holder is designed only to be held in a vise.  If you are looking for a holder to be bolted to a different surface, please check out the H-1 or the H-1L holders. This H-101 holds the larger Fretz 100 Series Stakes to give you maximum...

FRETZ VH-101 Vise Holder 100

sku: 8141048

This VH-101 holds the larger Fretz 100 Series Stakes to give you maximum control and flexibility while using larger stakes. The VH-101 must be held by a vise (not included). If you have the ability to permanently mount a holder to a sturdy surface for...

FRETZ VH-1L Long Vise Holder

sku: 8141049

The VH-1L Long Holder is designed only to be held in a vise.  If you are looking for a holder to be bolted to a different surface, please check out the H-1L (our 8141051) or the H-1 (8141060) holders. This VH-1 holder will hold all the Fretz...

H-1 Fretz Stake Holder

sku: 8141060

Shown mounted on the VB-1 Vise Block, which is sold separately, the H-1 Stake Holder is the foundation built to hold the Fretz Bezel T, Miniature Mushroom, and Miniature Forming Stakes. Each of those stakes are made to easily fit into the tapered hole of...

Hexagon Anvil

sku: 8141050

Used as a base for drilling, riveting and staking small parts. Case hardened and ground flat and smooth. Has 16 holes graduated from 5/64" to 1/4" and 5 milled slots. Measures 1-5/8" across the flats, approximately 3/4" thick. Shipping weight: 1/2 lb.

Repl. Hammer - Durston Bangle Forming Set

sku: 8141059

Replacement Hammer specially designed for use with the Durston Bangle Forming Set, our 8141057.   This convex hammer is made of nylon.  

Rubber Bench Block 4" Square

sku: 8121640

Our Rubber Bench Block offers a hard surface and is extremely handy for filing, hammering and other uses.  Made of vulcanized rubber, this rubber block is tough and firm, while giving the user an excellent surface to work on.  It enables one to...

Steel Square Bench Block 2-1/2" Square

sku: 8121652

Manufactured with high quality steel, these square bench blocks provide a solid stable work base; suitable for flattening or laying out designs.  Blocks are case-hardened and also ground flat and smooth. This one measures  (L x W x H) 2-1/2" x...

Steel Square Bench Block 4" Square

sku: 8121654

Manufactured with high quality steel, these square bench blocks provide a solid stable work base; suitable for flattening or laying out designs.  Blocks are case-hardened and also ground flat and smooth. This block measures: (L x W x H) 4" x 4" x...