THE CHILLER UNIT IS ONLY REQUIRED UNDER THE FOLLOWING AMBIENT WORK CONDITIONS:
- SWT 100 and 150: Ambient work temperature higher than 30ºC (86°F)
- SWA 150 and 300: Ambient work temperature higher than 35°C (95°F)
The Water Chiller is necessary for the SWA 150/300 and SWT 100/150 when the unit is in environments where the working temperature is above 30°C or 35°C respectively. The Water Chiller is used for additional cooling.
The SWA150 and SWT150 also need the Heat Exchanger for the Water chiller to perform properly. It aids with the heat transfer to keep the laser welder cool. See chart below for matching Heat Exchanger for your Chiller.
Electrical for Heat Exchangers for the SWA 150 and the SWT 150 is 230V, 50/60 Hz. Each measures 8.25"L x 11.5"W x 4"H (216 x 292 x 102mm). Weighs 22 lbs. (10kg). Made in Italy.
Custom Field
Electrical 230V, 50/60Hz
Item Height 4"
Item Length 8-1/4"
Item Width 11-1/2"
Model SWA-150
__uomdescrip Each
__techspec Y
