Our Foredom® LX  permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling.

The LX is a 1/10 HP, ball bearing motor featuring full power and torque from start up and throughout the entire speed range up to 5,000 rpm. It is ideal for use with the Foredom drill press. It is also well matched with the #15 and #15D Hammer Handpieces.

Comes equipped with a standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any Foredom handpiece (except H series).

Two year manufacturer's warranty. Also available in 115V.

Foredom LX Instruction Manual

How to Replace Shaft and Sheath


Important Safety Instructions from FOREDOM®

Always wear proper eye and face protection—
Always wear safety glasses and or a face shield when using rotary power tools. Regular eyeglasses do not provide sufficient protection.

Never wear loose clothing or jewelry and tie back long hair—
Ties, scarves, jewelry and long hair pose a hazard when using rotary power tools.

Never use accessories at speeds above the maximum RPM—
Accessories used at faster than the recommended speed can become damaged, and hazardous to you and others in the work area. Always check the speed rating.

Never use a damaged accessory—
If an accessory appears to be bent, loose, vibrating or out of balance do not continue to use it. Use a clean sharp accessory that is recommended for the material you are working on. Let the speed of the tool do the work. Do not force the tool or use excessive side pressure.

Always use dust collection, respirator, or face mask to prevent inhalation of dust particles from workpiece or abrasives.

Which Foredom Flex Shaft is right for your job? In Segment 1 of this three-part "Foredom in Action" series of videos, Wayne Werner discusses the differences and benefits of each. Segment 2 is a discussion of Speed Controls, while Segment 3 focuses on Foredom handpiece choices.)