- Most powerful flexshaft at low speeds
- Permanent Magnet motor provides a max speed of 5,000rpm
- Ideal for stone setting, wax modeling, drilling, chisel carving and other low-speed jobs
Our Foredom® LX Deluxe Stone setting set contains just about everything you need to get to work - motor, rheostat, 2 handpieces and accessories. With a total Retail Value of $554.00, this convenience is also a smart, economical decision. Motor and Rheostat carry a 2 Year Warranty. Made in USA.
Components:
Series LX Motor
This permanent magnet motor is specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Feature full power and torque from start up and throughout the entire speed range up to 5,000rpm. Comes equipped with a motor bale for hanging, and a standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath.
TXR Rheostat
The TXR looks the same as our standard foot operated rheostat but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX and TX motors. Features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. Measures 7" long, 41/2" wide, 23/8" high.
#18 Quik Change™ Handpiece
For use with only 2.35mm (3/32") shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication. Measures 7" long, 19/32" dia. Weighs: 3.65 oz.
#15 Hammer Handpiece
Reciprocating action for use at low speed (0-5,000rpm) by jewelers for stone setting and decorative work. Comes with an anvil point. Requires periodic lubrication. Hammer has 1/32" stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points in our 850-3780 set.; Pave Point (850-1275), and Stylus with Carbide Tip (850-1274). Measures 61/4" long, 1/4" dia. at tip. Weighs: 3.65 oz.
Set comes complete with a 13 piece assortment of step drills and steel engraving burs in small round bur holder and Flexible Shaft Grease.
Components:
Series LX Motor
This permanent magnet motor is specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Feature full power and torque from start up and throughout the entire speed range up to 5,000rpm. Comes equipped with a motor bale for hanging, and a standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath.
TXR Rheostat
The TXR looks the same as our standard foot operated rheostat but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX and TX motors. Features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. Measures 7" long, 41/2" wide, 23/8" high.
#18 Quik Change™ Handpiece
For use with only 2.35mm (3/32") shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication. Measures 7" long, 19/32" dia. Weighs: 3.65 oz.
#15 Hammer Handpiece
Reciprocating action for use at low speed (0-5,000rpm) by jewelers for stone setting and decorative work. Comes with an anvil point. Requires periodic lubrication. Hammer has 1/32" stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points in our 850-3780 set.; Pave Point (850-1275), and Stylus with Carbide Tip (850-1274). Measures 61/4" long, 1/4" dia. at tip. Weighs: 3.65 oz.
Set comes complete with a 13 piece assortment of step drills and steel engraving burs in small round bur holder and Flexible Shaft Grease.
Custom Field
__MAP Price 730.39
__AddtoCart Notes3 Catalog Page # 487
__Prop 65 Cancer and Reproductive Harm
__uomdescrip Set
