Repl. Handpiece for PUK2 or 3

sku: 8301627

PUK Replacement Handpiece for older style PUK2 or PUK3 welders. 

Repl. Handpiece for PUK 4/5/6

sku: 8301628

Replacement Handpiece for the PUK models 4/5/6.

PUK 6 SM6 Microscope Only

sku: 8301563

The SM6 10X microscope was designed specifically for use with the PUK 6 welder.  This unit has a large (20mm) field of view and is provided on a sturdy stand with cushioned hand supports and...

PUK 6 Welder Basic with Flow Regulator

sku: 8301560

Newest member of the PUK family of welders, the PUK6 gives jewelers not only the power to handle larger welding jobs, the accuracy required for delicate tasks, but also the technology and...

PUK 6 Welder with SMG5 Microscope, Articulating Arm and Flow Regulator

sku: 8301562

Newest member of the PUK family of welders, the PUK 6 gives jewelers not only the power to handle larger welding jobs, the accuracy required for delicate tasks, but also the technology and...

PUK 6 Welder with SM6 Microscope and Flow Regulator

sku: 8301561

Newest member of the PUK family of welders, the PUK 6 gives jewelers not only the power to handle larger welding jobs, the accuracy required for delicate tasks, but also the technology and...

Electrode Sharpener - PUK, Mold & Die Welder

sku: 8301625

Small and convenient, the PUK Electrode Sharpener is a useful accessory for every PUK welding device that conveniently plugs into any standard 110V outlet or can plug into the back of any generation...

PUK® U5 U6 Extended Electrodes and Cap Kit

sku: 8301577

These extended electrodes and cap kit are perfect for helping repair and weld in tight and hard to reach areas. The kit comes available with 4 various size electrode and 1 collet.

Repl. Rubber O-Ring Handpiece Cap - PUK, Mold & Die Welder

sku: 8301630

This replacement rubber gasket is used with 3mm (830-1524), 4mm (830-1502), 30mm (830-1592), 50mm (830-1593), and 100mm (830-1594) replacement caps for the PUK handpieces. .

Repl. Diamond Wheel Head for PUK Electrode Sharpener Plug In

sku: 8301626

Replacement diamond discs can be changed with ease using the Allen key. Made in Germany.

PUK U5 U6 Microscope

sku: 8301599

10X microscope comes with internal shutter eye protection, 20mm diameter field of view, magnetic base and LED illumination. The multi-adjustable joints with sturdy and secure knobs enable ease of...

1.0mm Dia. Extended Electrodes - PUK, Mold & Die Welder

sku: 8301598

These 1.0mm Diameter electrodes are 200mm long (approx. 7.8") - sold as a pair. The electrode increases precision by touching the exact spot of weld. Just prior to weld, the electrode pulls back...

PUK Handpiece Cap - 100mm

sku: 8301594

This is the 100mm tip cap for the PUK handpiece.

PUK Handpiece Cap - 50mm

sku: 8301593

This is the 50mm tip cap for the PUK handpiece.  

PUK Handpiece Cap - 30mm

sku: 8301592

This is the 30mm tip cap for the PUK handpiece.  

PUK U5 Transport Case

sku: 8301558

Our durable and functional U5 Transport Case makes moving the PUK U5 convenient. It also works well for stowing your PUK U5 when not in use.  Measures 24"W x 13"H x 25"L

SMG5 Microscope & Pivot Arm for PUK U5 General Industry Welder

sku: 8301538

Our SMG5 microscope has 10X magnification and an integrated eye protection system that uses LED lightening.  Provides four adjustable brightness levels to support the optimum illumination of the...

Repl. PUK Classic Optic Visor Only

sku: 8301535

Replacement Classic Optic Visor Only for the PUK 5 Jewelry Welder inclluded in our kit 8301540.  This optic unit is well suited for large workpieces that could not easily fit under a microscope...

Repl. PUK Flexible Band Weld Cable

sku: 8301527

Replacement PUK Flexible Band Weld Cable.

PUK Handpiece Standard 3MM Cap (Snap On)

sku: 8301524

This replacement cap (3mm) fits the PUK Standard Handpiece.  Cap snaps on.  If you need the screw on style cap, see our 8501525

Repl. PUK Collet Nut

sku: 8301523

This replacement collet nut fits on all the PUK handpieces.  

Repl. Nut for PUK Argon Hose

sku: 8301521

This ferrule screw nut is used for securing the argon hose to the regulator and PUK Controller.

Argon Regulator for all PUK welders and U6

sku: 8301516

An important prerequisite for dependable PUK welding results is the correct flow rate of Argon gas. The PUK Flow Regulator enables the exact setting of the recommended 2 liters per minute flow rate...

PUK Microscope Rubber Eye Flaps

sku: 8301512

Pair of replacement eye flaps for the oculars of the PUK microscopes. 

PUK 1.00mm Electrode Collet

sku: 8301503

This collet holds 1.00mm diameter electrodes for use with the PUK welders..

PUK Repl. Handpiece Standard Cap (4mm)

sku: 8301502

PUK Replacement Handpiece Standard Cap (4mm).

PUK 0.6mm Diameter Electrodes (Pkg of 10)

sku: 8301499

10 pre-sharpened electrodes 0.6mm diameter, 50mm in length. The thin electrode increases precision by touching the exact spot of weld. Just prior to weld, the electrode pulls back into the handpiece...

PUK Repl. Bulb for Optic Visor

sku: 8300994

Replacement bulb for the PUK Optic Visor.

PUK Foot Switch

sku: 8300993

Foot Switch - Must use for Tack Mode - works with all PUK models. 

PUK Pliers with Cable

sku: 8300973

Flat, pointed pliers for holding and handling small workpieces. A galvanic nickel plating gives these pliers optimal conductivity. 

Repl. Magnet Ground Cable for PUK U4 and U5

sku: 8300967

Replacement Magnet Ground Cable for PUK U4 and U5 (both Mold & Die and General Industry) welders.  

Repl. Glass for Microscope PUK 5 Welder

sku: 8300966

Replacement shutter glass located at the bottom of the viewing area of the PUK 5 microscope.  

PUK U5 Mold & Die Precision Welder - 110V

sku: 8300957

Applications:Repairing parting lines, mold seams, three point corners and edgesFilling in pores/pits/dimples and deep scratches on the mold surfaceWeld into slots, corners and ribsRepair slides,...

Extension Package for PUK U4 and U5 POWER Mold & Die Precision Welders

sku: 8300939

Extend the reach of your PUK U4 or U5.  For some large molds and in-press repairs, a few extra feet of reach may be necessary. This package includes an extended handpiece, extended magnet...

Repl. Handpiece 125mm (5") - PUK U6, U5, Mold & Die Welder

sku: 8300938

Replacement standard handpiece with 125cm (4') cable for the PUK U5 welder.

PUK 0.8mm Diameter Electrodes (Pkg of 10)

sku: 8300934

10 pre-sharpened tungsten electrodes available in 0.8mm diameter, measure 50mm in length. The thin electrode increases precision by touching the exact spot of weld. Just prior to weld, the electrode...

PUK 0.8mm Electrode Collet

sku: 8300933

 This collet holds 0.8mm diameter electrodes. 

PUK Electrode Collet 0.6mm and 0.5mm

sku: 8300931

This collet holds 0.6mm diameter electrodes. 

Repl. Magnetic Base for PUK U4/U5

sku: 8300926

Replacement Magnetic Base for PUK U4/U5  

PUK Copper Electrode (Tack) for PUK U4 and U5

sku: 8300919

PUK Copper Electrode (Tack) for General Industry PUK U$ and U5 welders.