Jewelers Carbide Burs, 3/32" Shank - Bearing 12 (3.10mm)

sku: 1250120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 13 (3.30mm)

sku: 1250130

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 15 (3.80mm)

sku: 1250150

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 16 (4.00mm)

sku: 1250160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 24 (5.60mm)

sku: 1250240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 25 (5.90mm)

sku: 1250250

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 28 (7.20mm)

sku: 1250280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 29 (7.60mm)

sku: 1250290

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 4 (1.50mm)

sku: 1250040

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 5 (1.70mm)

sku: 1250050

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 6 (1.90mm)

sku: 1250060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 10 (2.70mm)

sku: 1251100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 12 (3.10mm)

sku: 1251120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 18 (4.50mm)

sku: 1251180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 20 (5.00mm)

sku: 1251200

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 4 (1.50mm)

sku: 1251040

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 10 (2.70mm)

sku: 1252100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 12 (3.10mm)

sku: 1252120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 14 (3.50mm)

sku: 1252140

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 16 (4.00mm)

sku: 1252160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 18 (4.50mm)

sku: 1252180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 20 (5.00mm)

sku: 1252200

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 24 (5.60mm)

sku: 1252240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 26 (6.30mm)

sku: 1252260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 28 (7.20mm)

sku: 1252280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 30 (8.00mm)

sku: 1252300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 10 (2.70mm)

sku: 1254100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 11 (2.90mm)

sku: 1254110

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 12 (3.10mm)

sku: 1254120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 13 (3.30mm)

sku: 1254130

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 16 (4.00mm)

sku: 1254160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 18 (4.50mm)

sku: 1254180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 5 (1.70mm)

sku: 1254050

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 6 (1.90mm)

sku: 1254060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 7 (2.10mm)

sku: 1254070

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 9 (2.50mm)

sku: 1254090

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 12 (3.10mm)

sku: 1256120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 19 (4.70mm)

sku: 1256190

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 24 (5.60mm)

sku: 1256240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 28 (7.20mm)

sku: 1256280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 5 (1.70mm)

sku: 1256050

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 6 (1.90mm)

sku: 1256060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 9 (2.50mm)

sku: 1256090

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Round 12 (3.10mm) Carbide Bur

sku: 1255120

Individually hand-cut with diamond wheels.Sizes 4 to 8 feature one-piece construction; sizes 9 and larger are securely brazed onto steel shanks.All have fine teeth.All have 3/32" shanks.Made in USA.Like all carbide burs, these must be run at maximum...

Jewelers Round 8 (2.30mm) Carbide Bur

sku: 1255080

Individually hand-cut with diamond wheels.Sizes 4 to 8 feature one-piece construction; sizes 9 and larger are securely brazed onto steel shanks.All have fine teeth.All have 3/32" shanks.Made in USA.Like all carbide burs, these must be run at maximum...