This is the Aquaflame Service Kit for Aquaflame Model 500 ONLY.  Aquaflame Systems need to be serviced every 4000 working hours (approximately 12 months). The Service Kits for each model contain all the necessary components needed to self-service your unit. Instructions are supplied and need to be read before starting the service work. It is mandatory to use the gloves that are provided and protective eyewear at all times. The detailed instructions walk you through disassembling the unit where you will scrub, clean and rinse several internal areas. Several parts will be removed and replaced with the new ones that are supplied in the Service Kit. The estimated time for this procedure is 2 hours. See the chart below for all items included in the comprehensive kits.

Aquaflame Service Kits
Description	Model 500	Model 800	Model 1200
Set of Instructions	1	1	1
Siphon Pump	1	1	1
Pair of Safety Glasses	1	1	1
Wire Brush	1	1	1
Wire Wool Scouring Pad	1	1	1
Sight Tube Clips	2	2	2
PVC 6mm Clear Sight Tube	620mm	590mm	300mm
PVC 6mm Clear Cell to Gas Outlet	280mm	420mm	-
PVC 5mm Clear Pressure Switch to Flash Back Tube	132mm	140mm	220mm
PVC 5mm Clear Flash Back to Cell Top Tube	190mm	240mm	570mm
PVC 6mm Clear Tube T-Piece to Gas Outlet	-	-	460mm
PVC 6mm Clear Tube T-Piece to Cell Top	-	-	65mm (2)
Cell Connection Tube 110mm	-	-	1
Cell Tube Connection Clips	-	-	2
T-Piece	-	-	1
Wire Ties	4	4	6
Cell Gasket	1	1	2
Cell Insulators	4	4	8
Electrical Braid 260mm	-	2	2
Pressure Switch Blue Tube (10mm in Length)	1	1	1
Sight Tube for Booster (120mm in Length)	1	1	1
Flash Back Replacement Body	1	1	1
Polo Washer	2	2	2
Plain Washer	2	2	2
Case insulator	1	1	1
Neoprene Tubing	150mm	150mm	150mm
M8 Washer	1	1	3
M8 Nut	1	1	3
M6 Washer Large	4	4	8
M6 Washer Small	4	4	8
M6 Nut	8	8	16
Fuse 8 Amp 110 Volts	1	-	-
Fuse 15 Amp 110 Volts	-	1	1
Corrosive Label	1	1	1