Collet Holder & Collets for Foredom® BL-1A Bench Lathe Right-Side

sku: 8500624

Use flexshaft and small rotary accessories in your bench lathe! This collet holder fits the right side of the bench lathe and comes and with three easy-to-change collets to accommodate 3/32″, 1/8″ and 1/4″ shank mandrels. Also includes allen key, pin and...

Draw Tongs - 10"

sku: 1950250

For securely holding wire while pulling through drawplates.  Available in 8" or 10" overall lengths.

Draw Tongs - 8"

sku: 1950249

For securely holding wire while pulling through drawplates.  Available in 8" or 10" overall lengths.

Durston Pedestal Rolling Mill Stand - Cabinet Style

sku: 8552010

Pedestal style stand holds all manual mills except Durston C130DBL. The stand is drilled and tapped with appropriate holes. Measures 12"W x 14"D x 35.5"H (300W x 350D x 840H) and weighs 33 lbs. Stands should be secured to floor using the five bolts...

Durston Pedestal Rolling Mill Stand - Pedestal Style

sku: 8552007

Pedestal style stand holds all manual mills except Durston C130DBL. The stand is drilled and tapped with appropriate holes. Measures 12"W x 14"D x 35.5"H (300W x 350D x 840H) and weighs 33 lbs. Stands should be secured to floor using the five bolts...

Foredom® Polishing BL-1A Bench Lathe Kit with Accessories

sku: 8500619

Polishing Made Easy! The Foredom Bench Lathe is the perfect size polisher for the crowded bench or in areas where space is a concern.  The high torque permanent magnet motor runs smoothly and is also very quiet running.  Made of a heavy-duty...

Left Wheel Mandrel for Foredom® BL-1A Bench Lathe

sku: 8500613

Use this left wheel mandrel on the left hand side of our Foredom® BL-1A Bench Lathe.  See 8500621 if you want to have the wheel mandrel on the right hand side of your lathe.  All items sold separately.  

Optional Jacobs Chuck Arbor for Foredom® BL-1A Bench Lathe

sku: 8500629

Our Jacob Chuck Arbor with key increases the versatility of your Foredom® BL-1A Bench Lathe.  Install it on your lathe and you can easily mount small rotary accessories and tools with a range of shank sizes from 1/16" up to 1/4"...

PEPETOOLS® Rolling Mill Stand for Ultra Rolling Mills

sku: 8552088

PEPETOOLS Rolling Mill Universal Equipment Stand (855-2088)  Cast Iron Equipment Stand 16" x 7" Mounting Plate Equipment stands can be used with PEPETOOLS Bench Shears, Guillotines and 90mm, 110mm and...

Right Wheel Mandrel for Foredom® BL-1A Bench Lathe

sku: 8500621

Use this right wheel mandrel on the right hand side of our Foredom® BL-1A Bench Lathe.  See 8500613 if you want to have the wheel mandrel on the left hand side of your lathe.  All items sold separately.