Grobet USA® Swiss-made Teborg® cutters are made to the highest standards. The award-winning handles were designed to fit comfortably in your hand and maximize visibility of your work area. The rounded edges and bottoms and the anti-slip gripping surface make these slim, ergonomic handles stand out from the rest.
All cutters are constructed with adjustable screw lap joints. The lap joints minimize friction and the ability to adjust the screw maximizes jaw alignment.
The high-quality ball bearing steel used in the manufacture of the cutters has a Rockwell Harness of 63. The manufacturer provides a limited lifetime warranty against defects (see details below).
Teborg cutters are available with three types of cutting blades – semi-flush (SF), flush (FL) or full-flush (FF). See the drawings below to select the type of cut. Made in Switzerland.
- Light weight with ergonomic cushion grip handles
- Dual leaf springs made of stainless steel
- Adjustable screw lap joints provide a high level of strength and precision.
Cutting Blades
Limited Lifetime Warranty: Teborg® Pliers & Cutters carry a limited lifetime warranty against defects in material and workmanship. Wear and tear from normal use is not covered by warranty. Abuse and abnormal use is also exempt from warranty coverage. Warranty claims are to be made through dealer where the tool was purchased. All warranty claims are subject to approval by Grobet USA® USA and may result in tool repair or replacement with tool of equal value.
Item # | Type of Cut | Dimensions | Cutting Capacity | ||||||||
A Overall Length |
B Cutting Length |
C Head Width |
D Head Thickness |
E Oblique Tip Width |
F Cutter Tip Width |
G Oblique Head Length |
Soft | Medium | Hard | ||
Small Oval Cutters | |||||||||||
182-4010 | Semi-Flush | 125mm (4.9") |
10mm (0.39") |
10mm (0.39") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.2 - 1.2mm (32 - 17 AWG) |
0.1 - 1.0mm (38 - 18 AWG) |
0.03 - 0.6mm (48 -23 AWG) |
182-4011 | Flush | 125mm (4.9") |
10mm (0.39") |
10mm (0.39") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.1 - 1.2mm (38 - 17 AWG) |
0.1 - 1.0mm (38 - 18 AWG) |
- |
182-4012 | Full-Flush | 125mm (4.9") |
10mm (0.39") |
10mm (0.39") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.1 - 1.0mm (32 - 18 AWG) |
0.1 - 0.8mm (38 - 20 AWG) |
- |
Large Oval Cutters | |||||||||||
182-4013 | Semi-Flush | 125mm (4.9") |
12.5mm (0.49") |
12.5mm (0.49") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.3 - 1.6mm (29 - 14 AWG) |
0.1 - 1.3mm (38 - 16 AWG) |
0.03 - 0.7mm (48 -21 AWG) |
182-4014 | Flush | 125mm (4.9") |
12.5mm (0.49") |
12.5mm (0.49") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.2 - 1.6mm (32 - 14 AWG) |
0.1 - 1.2mm (38 - 17 AWG) |
- |
182-4015 | Full-Flush | 125mm (4.9") |
12.5mm (0.49") |
12.5mm (0.49") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.2 - 1.2mm (32 - 17 AWG) |
0.1 - 1.0mm (38 - 18 AWG) |
- |
X-Large Oval Cutters | |||||||||||
182-4016 | Semi-Flush | 130mm (5.1") |
14mm (0.55") |
16mm (0.63") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.4 - 2.0mm (26 - 12 AWG) |
0.3 - 1.6mm (29 - 14 AWG) |
0.05 - 0.9mm (44 -19 AWG) |
182-4017 | Flush | 130mm (5.1") |
14mm (0.55") |
16mm (0.63") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.3 - 1.6mm (29 - 14 AWG) |
0.3 - 1.5mm (29 - 15 AWG) |
- |
182-4018 | Full-Flush | 130mm (5.1") |
14mm (0.55") |
16mm (0.63") |
6.4mm (0.25") |
- | 0.5mm (0.02") |
- | 0.3 - 1.62mm (29 - 14 AWG) |
0.3 - 1.1mm (29 - 17 AWG) |
- |
Large Oblique Cutters | |||||||||||
182-4020 | Flush | 130mm (5.1") |
14.5mm (0.57") |
10mm (0.39") |
6.4mm (0.25") |
- | - | 11mm (0.43") |
0.2 - 1.2mm (32 - 17 AWG) |
0.1 - 1.0mm (38 - 18 AWG) |
- |
Micro Oblique Cutters | |||||||||||
182-4022 | Full-Flush | 130mm (5.1") |
20mm (0.79") |
10mm (0.39") |
6.4mm (0.25") |
0.5mm (0.02") |
- | 6mm (0.24") |
0.4 - 2.0mm (26 - 12 AWG) |
0.3 - 1.6mm (29 - 14 AWG) |
0.05 - 0.9mm (44 -19 AWG) |