This is the 1.5mm stroke length model. We have a 0.5mm or a1.0mm stroke length version also available - all sold separately.. Recommended speed is 5,000 to 7,000rpm. Caution – maximum speed is 10,000rpm and higher speeds will result in damage not covered by warranty. Measures 5-1/4"L x 1" diameter. Weighs 5.5 oz. Made in Sweden.
- Speed (maximum): 10,000 rpm
- Speed (recommended): 5,000 to 7,000 rpm (depending on weight of tool used)
- Stroke Length: 1.5mm
- Tool-holder: accepts 3.5mm diameter maximum tools
- Weight: approx. 120 grams (4.2 ounces)
- Noise Level: < 70 dB(A) at 9,000 rpm
- Vibration Levels*: Must read and heed the operation guide.
Safety Recommendations for Reciprocating Filers:
Prolonged use of vibrating or reciprocating tools may result in vibration-induced circulation problems in the hands. Always follow safe operating procedures. Using hand protection (i.e., insulated gloves) and taking frequent breaks can help minimize but not guarantee against injury. Operating these types of tools in cold weather or with a tight grip will reduce the period of operation before risking potential injury. Individuals with a tendency to suffer from poor circulation, frequently cold fingers or itchy hands should closely monitor the condition of their hands. If symptoms appear, seek medical advice immediately.